Bike Rack Instructions

LOADING
STEP 3 (4)
STEP 4 (3)
STEP 5 (3)

STEP 1

Prepare your bike for loading. Remove water bottles, pumps and other loose items that could fall off while the bus is moving. *E-Bikes are not allowed.*


STEP 2

Inform the bus driver that you will be loading your bike. You MUST load your bike from the curb or in front of the bus. Do NOT step into oncoming traffic to load your bike.

STEP 3

Squeeze handle up to release latch, then fold down the bike rack with one hand while holding your bike with the other.

STEP 4

Lift your bike onto the bike racks, fitting wheels into the proper wheel slots. Each wheel is labeled for the front wheel.

STEP 5

Raise the Support Arm over the front tire. The arm needs to be raised so that the hook rests past the highest point of the tire closest to the frame to avoid swaying.

UNLOADING
STEP 2 (1)
STEP 3 (7)
STEP 4 (4)

STEP 1

Inform the bus driver that you will be unloading your bike when approaching your stop, then unload it from the curb or in front of the bus.

STEP 2

Raise the Support Arm off the tire. The Support Arm automatically folds down to a secure position.

STEP 3

Lift your bike out of the bike rack and secure it on the ground.

STEP 4

Fold up the bike rack for buses, if there are no bikes on the rack and no one else is waiting to load their bike. The bike rack locks in place.